Your Toilet Can Probably Cause Water Damage

Categories: Solution
No Comments

Some of the most harmful threats that could encounter a homeowner are those that may not even be noticed initially.  From a couple of things that this may apply to, I must say that the threat of suffering from water damage in your house would have to position at the top of the list of mishaps that could occur.  There are plenty of obvious ways that your home could one day encounter an uninvited intrusion of water, but some of the most damaging of the several ways can actually be those which you would not think to plan ahead for and therefore are out of sight for a period of time when they may occur.

It’s typical for a homeowner that’s worried about preventing water from penetrating their house to go around the house and inspect for cracks in the base, shingles missing from your roof, or even weatherstripping around doors and windows which are in bad condition and in need of repair or replacement.   There are other areas in your home that are just as vulnerable to the threat of water intrusion that will usually go completely unnoticed until it is too late and water has already come in and made its own mark.

After assessing the water damage in the toilet leak, it’s very important to find out the way to stop the overflow.  The very first thing must be done is to contain the contamination as well as the overflow, if the sewer could be seen.  By making use of the cloth or newspaper, stem the overflow.  Always wear rubber boots and rubber gloves and don’t touch the sewage.  You can also wear masks to prevent inhalation.

The cleanup procedure for the water damage in the bathroom overflow should be done in earnest.  Firstly sewage needs to be removed from the areas that are affected.  This may be done through sewage suction devices.  Next, the region needs to be cleaned and disinfected.  Usually, a detergent with bleach is used for cleaning and disinfecting the affected regions.  The whole area that comes in contact with the sewage ought to be removed.

Sewage can penetrate the grout from the tile and the hardwood floors as well as the walls.  The wooden flooring may want to be eliminated and the walls will need to be dried out entirely to prevent the development of mildew and mold.  An air conditioner would also be needed to wash and purify the atmosphere and eliminate any fumes and scents that persist after flood damage restoration.

Other Causes of Water Damage

Water damage from a bathroom overflow can be immense and the stink which follows can make it quite worse.  Another issue with the overflow is the fact that it can damage the floors and ceilings.  Extensive damage can be caused when there are floors.  The sewage can get blocked for any range of factors.  When waste pipes and the drainpipes getting clogged, one of the reasons can be improper waste disposal.  They can be choked because of objects been flushed down the toilets, the buildup of grime, cracked pipes, and leakages, etc..

One place, actually several areas, that will require attention which is all combined together by something is the pipes that are related to your own plumbing.  These pipes will travel through many regions of your house and are always neatly tucked away and out of sight.  While this may be aesthetically appealing to you personally, it helps for many hidden regions that water may invade without being discovered, and if a water flow does happen at any moment, the end result may easily be thousands of dollars in building materials that will have to be replaced along with the possible threat of mold damage.  The best way to address this potential threat and prevent a disaster from happening is to monitor the water pressure inside your house and sometimes have a plumber come to your home and inspect all of your pipes to make sure there aren’t any leaks or fittings which are showing excessive wear.  This will require a tiny bit of financial investment every time that the plumber pays a trip, but it is going to save you a massive headache and a lot of money in repair costs down the road by simply preventing the water damage that could easily come by not only doing these routine inspections and grabbing a problem beforehand.

Another area of the house that generally gets overlooked is situated at the very top of the home which comprises the pipes and vents that stick from your roof.  They’re constantly exposed to the outdoor elements and as time passes, the seals they utilize to keep water from seeping in around their bases can wear outside and allow water to trickle in.  Since the water will usually trickle slowly at first and drain in your loft, which is a low traffic area, water may be permitted to sit for a time period and build up.  This will create a chance for your ceiling or for growth and the development of mold.  On a wonderful sunny day when you have someone to help you in staying safe, climb on top of your roof and take a close look at the seals around these things in your roof to be sure there is no cracking or corrosion of those seals.  Whether there aren’t any signs of wear, go ahead and replace the seals now before water is allowed to your property.

By taking these precautionary steps now, you’ll be able to save money by not needing to substitute building materials that have been damaged by water later on.

Ideas To Prevent Water Damage In The Bathroom

Here are some routine toilet checkup Pointers to Help prevent moisture or mold problems:

Pipes 

Most plumbing is hidden in the walls and serious issues can start invisibly.

Should you hear tiny drips from the wall, take immediate action.  If a wall is moist to the touch or stained, there is moisture damage in progress.  Get help.  If a wall in an adjoining room is moist to the touch, then there is a developing moisture problem that requires prompt investigation and repair.

Any observable leaks under the sink or around the toilet need to be repaired before they lead to more severe and costly moisture damage.  Signs of water damage in flooring in the bathroom or adjacent rooms are a red flag of a potential water leak.  Don’t ignore it.

Exhaust Fan

One of the most important tools for moisture control in the toilet is your exhaust fan.  A nonfunctioning exhaust fan overloads the bathroom with air.  Get it repaired straight away.

When the exhaust fan doesn’t come on automatically when the bathroom is in use, consider having the wiring altered so it is going to.

When the area around the fan isn’t clean and dry, or if dust or any sort of expansion has accumulated on the blades or inside the exhaust duct, then it may be a warning sign of surplus moisture build-up.  Wash out the place and fan well.  That the fan is functioning properly.

Be sure the bathroom exhaust fan vents to the outdoors, not in to the home or attic.  If the external port dampers do not operate properly or do not seat well, have them replaced or fixed.

Toilet

The bathroom has crucial inlet and outlet functions that need to be sealed and leak-free.  Make sure there are no water line leaks.  Repair even leaks instantly.  Check for signs of discoloration or water damage on the floor.  If present, check the toilet rim seal and tank seal instantly.

When the floor around the bathroom appears to be soft, structural damage may be happening.  Call a Specialist to help in restoration. We used this company’s services when we had this problem.

Windows

Toilet windows will need to perform properly in a wide range of humidity and temperature requirements.  Whether there are any obvious fractures in the weather-stripping or seals, fix them.  Malfunctioning locks and closing mechanisms shouldn’t be ignored.  If there are stains or flaking on the painted surfaces, they need to be resealed with a fresh coat of sealer and paint.

Showers and Bathtubs

Places that are exposed to this much water need close focus to prevent difficulties.  If the caulking is cracked, stiff, or loose in areas, replace it immediately.